#
# PCI configuration
#
config PCI_MSI
	bool "Message Signaled Interrupts (MSI and MSI-X)"
	depends on PCI
	depends on (X86_LOCAL_APIC && X86_IO_APIC) || IA64
	help
	   This allows device drivers to enable MSI (Message Signaled
	   Interrupts).  Message Signaled Interrupts enable a device to
	   generate an interrupt using an inbound Memory Write on its
	   PCI bus instead of asserting a device IRQ pin.

	   If you don't know what to do here, say N.

config PCI_LEGACY_PROC
	bool "Legacy /proc/pci interface"
	depends on PCI
	---help---
	  This feature enables a procfs file -- /proc/pci -- that provides a 
	  summary of PCI devices in the system. 

	  This feature has been deprecated as of v2.5.53, in favor of using the 
	  tool lspci(8). This feature may be removed at a future date. 

	  lspci can provide the same data, as well as much more. lspci is a part of
	  the pci-utils package, which should be installed by your distribution. 
	  See <file:Documentation/Changes> for information on where to get the latest
	  version. 

	  When in doubt, say N.

config PCI_INIT_IN_MONITOR
	bool "PCI Initialized in bootrom"
	depends on PCI
	help
	  This flag indicates that the PCI bus was initialized in the bootrom
	  monitor, and that further hardware initialization should not be
	  performed.  Examples are when u-boot's PCI functions are used to
	  pre-initialize hardware at bootup time.
	  
	  Note that bus scan should still be performed to configure the PCI
	  devices as required for the Linux system.

config PCI_DEBUG
	bool "PCI Debugging"
	depends on PCI && DEBUG_KERNEL
	help
	  Say Y here if you want the PCI core to produce a bunch of debug
	  messages to the system log.  Select this if you are having a
	  problem with PCI support and want to see more of what is going on.

	  When in doubt, say N.

